| +1 (604) 608 - 4315
Slide background
Slide background
Slide background
Slide background
Slide background
Slide background
  • The IRRILINE Side Roll (a.k.a. Motoroll, Roll Line, Wheel Line, Wheel Move) is a mechanized sprinkler irrigation system, capable of operating well in most soils and irrigating most crops, except tall crops such as sugar cane and corn, and it can operate up to 7% slope.
    Side Roll is an ideal choice for modern technical irrigation in any location, especially in areas with high labor costs. The system can easily be operated and maintained, and there is no need for highly skilled technical support personnel. The Side Roll is an efficient and economical system in small fields, and the cost per hectare/acre is relatively low.

    The Side Roll consists of rigidly coupled aluminum pipes, mounted on large wheels with the pipe acting as an axel. The drive unit contains an 8 HP gasoline engine and a transmission with a reverse gear.

    Irriline has 4″ and 5″ Side Roll that can be up to 500 m in length. Each 12 m has one sprinkler and operating pressure of about 4 atmosphere (60 psi) at the inlet.

    To learn more about Side Roll, please see Features, Specifications, Operation, and Performance.


    4″ Pipe Model 5″ Pipe Model Length
    I 396-12-4″ I 396-12-5″ 396
    I 384-12-4″ I 384-12-5″ 384
    I 372-12-4″ I 372-12-5″ 372
    I 360-12-4″ I 360-12-5″ 360
    I 348-12-4″ I 348-12-5″ 348
    I 336-12-4″ I 336-12-5″ 336
    I 324-12-4″ I 324-12-5″ 324
    I 312-12-4″ I 312-12-5″ 312
    I 300-12-4″ I 300-12-5″ 300
    I 288-12-4″ I 288-12-5″ 288
    I 276-12-4″ I 276-12-5″ 276
    I 264-12-4″ I 264-12-5″ 264
    I 252-12-4″ I 252-12-5″ 252
    I 240-12-4″ I 240-12-5″ 240
    I 228-12-4″ I 228-12-5″ 228
    I 216-12-4″ I 216-12-5″ 216
    I 204-12-4″ I 204-12-5″ 204


    Side Roll New Features

    What is new in IRRILINE Side Roll Irrigation Systems?


    • Newly fixed manometers on both ends of Irriline Side Roll System, enabling to Measure the correct
      pressure at any time.
    • The New Side Rolls are with Hot Dip Galvanized chassis
    • Wheels: All wheels are made by hot deep galvanized
    • Irriline now manufactures Side roll with 287 Cm wheels for higher crop irrigation with 150 cm Height

    Irriline Hand Roll: Wheel’s heights can be 158Cm / 193Cm / 287Cm

    Sprinkler & crop clearance with 158Cm Wheels


    Sprinkler & crop clearance with 193Cm Wheels


    Sprinkler & crop clearance with 287Cm Wheels



    Covering Area:

    Irrigating area covered by a Side Roll Irrigation System is depends on length of farm, soil and climate. Refer to the data table below:

    Side Roll Length
    Farm Dimension M Covering area Hectare Irrigating time in each position Irrigating position OR Movement per Day
    204 212 x 400 8.50 4 to 5 Hours 3 to 4 Times
    216 224 x 400 9.00 4 to 5 Hours 3 to 4 Times
    228 236 x 400 9.50 4 to 5 Hours 3 to 4 Times
    240 248 x 400 9.90 4 to 5 Hours 3 to 4 Times
    252 260 x 400 10.40 4 to 5 Hours 3 to 4 Times
    264 272 x 400 10.90 4 to 5 Hours 3 to 4 Times
    276 284 x 400 11.40 4 to 5 Hours 3 to 4 Times
    288 296 x 400 11.80 4 to 5 Hours 3 to 4 Times
    300 308 x 400 12.30 4 to 5 Hours 3 to 4 Times
    312 320 x 400 12.80 4 to 5 Hours 3 to 4 Times
    324 332 x 400 13.30 4 to 5 Hours 3 to 4 Times
    336 344 x 400 13.80 4 to 5 Hours 3 to 4 Times
    348 356 x 400 14.30 4 to 5 Hours 3 to 4 Times
    360 368 x 400 14.70 4 to 5 Hours 3 to 4 Times
    372 380 x 400 15.20 4 to 5 Hours 3 to 4 Times
    384 392 x 400 15.70 4 to 5 Hours 3 to 4 Times
    396 404 x 400 16.20 4 to 5 Hours 3 to 4 Times
    • Features of Side Roll

      Side Roll: One of the safest and most reliable mechanized sprinkler irrigation systems available.

      The Irriline Side Roll is easy to understand, operate and maintain, and there is no need for complex technical support for this mechanized sprinkler irrigation system.

    • Pipe

      Rigidly coupled high quality 100 mm (4″) diameter extruded aluminum tubes, mounted on large wheel with the pipe acting as an axel. Pipes are about 12 m (40′) long and 1.8 mm (0.071″) thick. On each side of the drive unit, pipes are about 6 m (20′) long and 2.2 mm (0.087″) thick, providing more strength and stability. The system can be up to 490 m (1608′) in length, but variation in length can be ordered. Our heavy-duty extruded aluminum pipes meet or exceed ASAE (American Society of Agricultural Engineers) standards for aluminum sprinkler irrigation tubing (S263.3).

    • Mover Unit

      The Irrican Motoroll is repositioned by a hydraulic power mover. The mover unit, located in the center of the aluminum line, combines an 8 HP air-cooled gasoline engine, hydraulic system with motors, hoses and gears, and heavy duty frame and high quality steel chain for easy movement and alignment.


    • Sprinklers

      Sprinklers, from the premier manufacturers of the industry, are mounted on self-levelers, to keep the sprinklers always right side up, and have protection cups to prevent clogging.
    • Couplers

      Made of high quality die cast aluminum, couplers are designed for easy and quick line assembly and take down.


    • Drain Valves

      Located on each female coupler, drain valves automatically drain the pipe when the water is turned off, and seal when the water is turned on.
      Note: The system must be completely drained before repositioning.


    • End Plug

      One-piece die cast flush plug with splash guard. It is easy to clean any debris and trash with the manual control valve.

    • Wheels

      Heavy-duty hot dip galvanized steel wheels with 3 mm cleats provide great strength and easy movement. There are different sizes to choose from: 1.47 m (58′), 1.93 m (76″), and 2.85 m (112″) in diameter, providing more flexibility for various crop clearances.


    • Flexible Hose

      Special long-lasting 100 mm x 6 m (4″ x 20′) UV-resistant flexible hose is used to connect the Motoroll to the supply line (mainline). Both end-feed and center-feed are available, depending on the location of the supply line and the length of the system.


    • Stabilizer

      Strong stabilizers are available for the long term parking of the Motoroll and windy conditions (optional).


  • sideroll operation
    Side Roll is an aluminum pipe (lateral) mounted on large wheels. The Side Roll irrigates in place (does not move while irrigating) and it is moved from position to position between irrigation runs. An air-cooled gasoline engine provides the required power to move the aluminum sprinkler line across the field. The aluminum pipe is connected to hydrants by a flexible hose. The hydrants are usually spaced every 18 meters (60′) along the supply line (mainline). The supply line may be located along one edge or in the center of the field.

    The Side Roll is very simple to operate. When an irrigation run is finished, the operator simply turns off the mainline valve and disconnects the flexible hose. The drain valves automatically drain the pipe due to the reduced pressure. The operator then starts the engine and rolls the pipe to the next hydrant position along the field, reconnects the flexible hose, turns on the water and starts the next irrigation run. The whole operation of repositioning takes about 20 minutes for a single person. When the Side Roll has reached the last position at the end of the field, it is driven back to the starting point for the next irrigation cycle.


    • Pipe

      A. 100 mm x 12 m x 1.8 mm (4″ x 40′ x 0.071″) extruded aluminum pipe with male and female couplers.
      B. 100 mm x 6 m x 2.2 mm (4″ x 20′ x 0.087″) extruded aluminum pipe with male and female couplers.

    • Hose Set

      A. 100 mm x 6 m (4″ x 20′) UV-treated flexible discharge hose with standard adapters.
      B. 100 mm x 100 mm (4″ x 4″) hydrant opener.

    • Couplers

      A. Quality die cast aluminum couplers, fixed with epoxy and handle band.
      B. Female couplers with outlet and flapper.
      C. Quality torque coupler clamp and gaskets.

    • Sprinklers

      A. Brass sprinklers with protection cap, 1.8 m3/hr flow rate and about 18 m radius with 4 bar operating pressure.
      B. Galvanized sprinkler levelers, risers and elbows.

    • Mover Unit

      A. 8 HP air-cooled gasoline engine Briggs & Stratton.
      B. Hydraulic pump and orbit motors ETEN.
      C. Quality chains and stainless bolts & nuts.
      D. Fiberglass safety cover for engine and hydraulic system.
    • Wheels

      Hot dip galvanized 1.47 m (58″), 1.93 m (76″), or 2.85 m (112″) diameter wheels, including 20 spokes, hubs, half rims, 10 strong 3 mm cleats.

    • End Plug

      Die cast flush plug with splash guard for cleaning debris.

    • Stabilizers

      Galvanized stabilizers for windy conditions (optional).
  • Performance of Side Roll

    Area (Ha) irrigated by a Side Roll: for different lengths, application rates, and irrigation cycles


    1. PARTS

    2. PARTS NO.


    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    2. Sprinkler 3/4″ PC
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. sideroll_parts1
    1. 4”X12 m Alum Pipe with 2 Coupler